Filtration Articles & Insights | PoreFiltration

When to Use Depth Filtration or Pleated Depth Filtration

Written by David Keay | Nov 10, 2026

Selecting the right filter cartridge

Selecting the right filter cartridge is about more than choosing a micron rating. The construction of the filter media can have a significant impact on contaminant removal, dirt-holding capacity, differential pressure, service life and the overall operating cost of a filtration system.

Two widely used technologies in industrial liquid filtration are depth filters and pleated filters. Both are designed to remove suspended particulate contamination, but their construction and filtration characteristics can differ considerably.

Depth filtration is commonly associated with capturing particles throughout a three-dimensional media structure, while conventional pleated filters use folded media to increase the available filtration area within a relatively compact cartridge.

However, the distinction is not always straightforward. Some pleated cartridges incorporate depth-style media, combining the benefits of both constructions.

Understanding how these technologies work, and how they respond to different contaminant loads and operating conditions, is essential when specifying a filter for an industrial process.

So, when should you choose depth filtration over pleated filtration, and when might a pleated cartridge provide the better solution?

 

What is depth filtration? 

Depth filters are designed to capture particles throughout the thickness of the filter media rather than relying solely on particle accumulation at the outer surface.

Most industrial depth cartridges use a porous, fibrous structure through which liquid passes. As the fluid travels through the media, particles are retained through a combination of mechanisms, including interception, mechanical straining and, depending on the media and particle characteristics, other interactions within the filter structure.

One of the most common designs is graded-density media.

In a graded-density filter, the media structure is designed to become progressively finer from the upstream side towards the downstream side. Larger particles are captured towards the outside of the filter, while smaller particles can penetrate further into the media before being retained.

This arrangement allows the available media volume to contribute to contaminant retention.

Without an appropriate graded structure, larger particles can accumulate rapidly at the filter surface, potentially restricting flow before the internal media has been fully utilised.

How does depth filtration work? 

Consider a polypropylene depth cartridge used to filter process water containing a mixture of suspended solids.

As contaminated water enters the cartridge:

  1. Larger particles are intercepted by the outer, more open regions of the media.
  2. Smaller particles travel further into the filter structure.
  3. Progressively finer regions of the media capture particles that pass through the upstream layers.
  4. The filtered liquid exits through the downstream side of the cartridge.

The result is a three-dimensional filtration structure that can accommodate a relatively broad distribution of particle sizes.

However, the actual retention characteristics depend on the media design, pore structure and specified filtration efficiency. A graded-density construction does not automatically guarantee a particular absolute micron rating.

Common depth filter materials 

Industrial depth cartridges are manufactured using several different materials, each offering different characteristics.

  • Polypropylene (PP): Widely used for general-purpose liquid filtration, water treatment and chemical applications where polypropylene offers suitable chemical compatibility.
  • Glass fibre: Often used where high dirt-holding capacity and fine particulate retention are required. Its suitability depends on the fluid, temperature and cartridge construction.
  • Cellulose and other fibrous media: Used in selected applications where their filtration characteristics and chemical compatibility are appropriate.
  • Water treatment and reverse osmosis prefiltration.
  • Removal of suspended solids from industrial process liquids.
  • Applications involving variable particle sizes.
  • Prefiltration ahead of finer cartridge or membrane filters.
  • Processes where relatively high contaminant loading is expected.

The main consideration is that depth filters provide internal media volume for particle retention, rather than relying exclusively on the available external surface.

What is pleated filtration?

Pleated filters use a sheet of filter media folded into a series of pleats and arranged around a supporting core or other structural components.

The purpose of pleating is to increase the available filtration area without significantly increasing the external dimensions of the cartridge.

A conventional cylindrical cartridge has a relatively limited external surface area. By folding the media into multiple pleats, manufacturers can incorporate considerably more filtration material into the same housing footprint.

This can provide several advantages, particularly where high flow rates, lower initial pressure drop or finer filtration are required.

How does pleated filtration work?

As liquid enters a pleated cartridge, it passes through the available filter media, with particles retained according to the media's pore structure and filtration characteristics.

The increased media area distributes the incoming flow across a larger filtration surface.

This can reduce the local flow loading on the media and help maintain a lower clean pressure drop compared with a similar-sized cartridge with less effective filtration area.

However, the performance of a pleated cartridge is influenced by more than the number of pleats.

Factors include:

  • Total effective filtration area.
  • Pleat height, spacing and geometry.
  • Media thickness and permeability.
  • Support and drainage layers.
  • Flow direction and cartridge construction.
  • The viscosity and particulate loading of the liquid.

Poorly designed or densely packed pleats can restrict flow channels. If contaminants accumulate between the folds, parts of the media may become less effective or blocked, reducing the usable filtration area.

This is why effective pleat design and flow distribution are important considerations when selecting a cartridge.

Common pleated filter materials 

Pleated cartridges are available in a range of materials to suit different filtration requirements.

  • Polypropylene (PP): Commonly used for general liquid filtration, process water and chemical applications.
  • Polyethersulfone (PES): Often selected for fine filtration where hydrophilic membrane characteristics and defined retention are important.
  • Polytetrafluoroethylene (PTFE): Offers broad chemical resistance and is commonly used in specialist liquid and gas filtration applications.
  • Polyvinylidene fluoride (PVDF): Used in applications requiring chemical resistance and specialist filtration performance.
  • Nylon: Suitable for selected applications where its mechanical and chemical properties are appropriate.

The important distinction is that pleating describes the physical arrangement of the media, not necessarily the filtration mechanism.

A pleated cartridge can use surface-style media, membrane media or a thicker depth-style construction.

Pleated cartridges are commonly used for:

  • Fine particulate filtration.
  • Final filtration and polishing.
  • Prefiltration ahead of membrane systems.
  • Applications requiring defined particle retention.
  • High-flow applications where cartridge space is limited.
  • Processes where a relatively low clean pressure drop is desirable.

Depth vs pleated filtration: What are the key differences?

Although both technologies remove particulate contamination, there are several important differences to consider when selecting between them.

1. Dirt-holding capacity

Dirt-holding capacity is one of the most important factors when comparing filtration technologies.

It refers to the amount of contaminant a filter can retain before reaching a defined terminal differential pressure or another specified changeout condition.

Depth filtration has a natural advantage in applications where particles can be distributed throughout the thickness of the media.

Rather than relying exclusively on surface accumulation, a depth cartridge provides internal media volume in which contaminants can be retained.

This can be particularly useful when filtering liquids containing a mixture of particle sizes or relatively high suspended-solids concentrations.

For example, consider an industrial water treatment system receiving water containing rust particles, sediment and other suspended solids.

A depth filter with a suitable graded-density structure can capture larger particles in its outer regions while allowing smaller particles to travel further into the media.

This helps utilise more of the available filtration structure before the cartridge reaches its terminal pressure drop.

Pleated filters approach dirt retention differently.

Their main design advantage is the increased surface area created by the folded media. By distributing the flow across a larger area, pleated cartridges can accommodate significant particulate loading, particularly where the media and pleat configuration are designed for this purpose.

However, a conventional surface-style pleated filter may be more susceptible to surface blinding when exposed to high concentrations of contaminants that accumulate at the media face.

This is not necessarily a limitation of all pleated cartridges. Pleated-depth designs combine increased filtration area with a thicker, graded media structure, allowing them to achieve both high surface area and internal particle retention.

2. Surface area and filtration efficiency

Surface area plays an important role in determining how a cartridge performs under operating conditions.

Pleated filters are specifically designed to maximise the amount of available filtration media within a compact cartridge.

For example, a 10-inch pleated cartridge can contain significantly more filter media than a similarly sized cylindrical cartridge without pleating.

The additional area can reduce the flow loading per unit of media, potentially lowering clean differential pressure and allowing higher flow rates.

This is particularly useful in systems where space is limited or where multiple cartridges would otherwise be required to achieve the desired flow capacity.

However, the total media area is not necessarily the same as the effective filtration area.

If pleats are too tightly packed, flow distribution is poor or contaminants accumulate within the pleat channels, some of the media may become less accessible.

Depth filters may have a different surface-area profile, but their thicker construction provides additional internal volume for particle capture.

This means the two technologies are not directly comparable by surface area alone.

Does more surface area always mean better filtration?

Not necessarily.

A larger filtration area can help reduce local flow loading and initial pressure drop, but it does not automatically improve particle retention.

Filtration efficiency is primarily influenced by the media structure, pore characteristics, particle properties and the specified test method.

For example, a pleated cartridge with a 10-micron nominal rating is not automatically more efficient than a depth cartridge with the same stated rating.

The efficiency associated with a micron rating needs to be understood, particularly where downstream equipment or product quality depends on predictable particle removal.

3. The type and concentration of contaminant

Understanding the contaminant is one of the most important parts of selecting a filtration technology.

Two processes can have identical flow rates and micron requirements but require completely different filter constructions because the characteristics of their contaminants are different.

Important factors include:

  • Particle size distribution.
  • Particle concentration.
  • Particle shape and physical properties.
  • Whether contaminants are hard, soft, fibrous or deformable.
  • Whether particles tend to agglomerate.
  • Whether the liquid contains gels, oils or other materials that can cause media blinding.

For example, a water treatment application containing relatively high concentrations of sediment and rust may benefit from a depth-style cartridge capable of capturing particles throughout the media.

By comparison, a process requiring fine polishing of a relatively clean liquid may benefit from a pleated cartridge with a defined retention specification and suitable media.

What happens when the contaminant is not a conventional particle?

Some filtration applications involve contaminants that do not behave like typical hard particles.

Gels, agglomerates and deformable materials can present particular challenges.

These contaminants may deform under pressure, accumulate within the media or block available flow channels.

A filter that performs well with rigid particles may therefore have a very different service life when exposed to soft or deformable contaminants.

Pall's technical literature highlights the use of specialist pleated-depth constructions for applications involving contaminants such as gels and agglomerates.

This is a useful example of why filter construction should be matched to the actual contaminant rather than relying on a general distinction between depth and pleated filtration.

When to consider depth filtration: Mixed particle sizes, suspended solids and applications where internal contaminant retention is beneficial.

When to consider pleated filtration: Applications requiring controlled particulate retention, fine polishing or a larger effective filtration area.

The individual media construction remains critical in both cases.

4. Operating costs and filter life

The initial purchase price of a filter cartridge is only one part of its overall cost.

A lower-priced cartridge may require more frequent replacements, while a more expensive option could provide a longer service life or improve the performance of downstream equipment.

For process engineers and maintenance teams, the more useful comparison is often the total cost of filtration over a defined operating period.

This should include:

  • Initial cartridge purchase price.
  • Number of cartridges required to achieve the design flow rate.
  • Dirt-holding capacity and expected service life.
  • Frequency of filter replacements.
  • Labour associated with changeouts.
  • Differential pressure and pumping energy.
  • Waste disposal costs.
  • Production interruptions or downstream contamination risks.

Understanding differential pressure

Differential pressure (DP) is the pressure difference between the upstream and downstream sides of a filter.

As particles accumulate within or on the filter media, resistance to flow generally increases. This causes the differential pressure to rise.

Monitoring DP can provide a useful indication of filter loading and help determine when a cartridge should be replaced.

However, a filter should not automatically be operated until it reaches its maximum allowable differential pressure.

The appropriate changeout point depends on the cartridge manufacturer's limits, system design, downstream requirements and the risk of contaminant breakthrough or damage.

For example, a cartridge may still be mechanically intact but have reached a differential pressure that makes it unsuitable for maintaining the required process flow.

Conversely, replacing filters too early can increase consumable costs and unnecessary waste.

Why does filter life vary?

Two cartridges with the same nominal micron rating can have very different service lives.

This may be due to differences in:

  • Media thickness and structure.
  • Effective filtration area.
  • Dirt-holding capacity.
  • Retention efficiency.
  • Flow rate and operating pressure.
  • Contaminant concentration and particle distribution.
  • Liquid viscosity and temperature.

A pleated filter with a large effective area may offer a long service life where contamination levels are relatively low.

A depth filter may offer better service life where a broad range of particle sizes needs to be captured throughout the media.

However, there are no universal rules. The performance of the individual cartridge needs to be assessed under representative operating conditions.

Looking beyond the cartridge price

Consider a system that uses a single cartridge type to remove all particulate contamination.

If the filter is exposed to a high contaminant load, it may require frequent replacement. This can increase labour costs, consumable expenditure and production interruptions.

Introducing a suitable upstream depth filtration stage could remove a proportion of the larger contaminant load before it reaches the finer downstream filter.

Although this introduces an additional filtration stage and associated purchase cost, it may extend downstream cartridge life and reduce the overall cost of operation.

The important point is to evaluate the entire filtration system rather than the price of an individual cartridge.

When should you choose depth filtration over pleated filtration?

There is no universal answer. The correct choice depends on the process, contaminant characteristics, required filtration performance and operating conditions.

The following guide provides a starting point when comparing the two technologies.

 

Application requirement

Technology to consider

Reason

High suspended-solids loading

Depth filtration

Internal media volume can accommodate particles throughout the filter structure

Broad particle-size distribution

Depth filtration

Graded-density media can capture particles at different points through the media

General process-water prefiltration

Depth filtration

Often suitable for removing suspended solids before finer filtration

Fine particulate retention

Pleated filtration

Wide choice of fine-rated media, including membrane constructions

Large filtration area in a compact cartridge

Pleated filtration

Pleat geometry increases available media area

High flow rates with limited housing space

Pleated filtration

High effective filtration area can support greater flow capacity

Final filtration and polishing

Pleated filtration

Suitable media can provide defined and consistent particle retention

Protecting a downstream membrane

Either

Depends on upstream contaminant loading and the required protection level

Gels and agglomerates

Application-specific

Media structure and pleat design need to be assessed carefully

These are general guidelines rather than fixed rules. Depth and pleated cartridges are available in a wide range of media constructions and efficiencies.

A pleated-depth cartridge, for example, can combine the increased filtration area of a pleated design with the graded-density structure of a depth filter.

The most appropriate solution should always be based on the manufacturer's technical data and the requirements of the process.

Can depth and pleated filters be used together?

Absolutely. In many applications, combining the two technologies can provide a more effective filtration solution than relying on a single cartridge.

A staged filtration approach allows each filter to perform a different role and can help distribute the overall contaminant load across multiple stages.

For example, a water treatment system might use the following arrangement:

Stage 1 – Depth filtration

An appropriately selected depth cartridge removes larger particles and captures a proportion of the suspended-solids loading.

This reduces the amount of contamination reaching the downstream filter.

Stage 2 – Pleated filtration

A finer pleated cartridge provides additional particulate removal.

Depending on the media and retention specification, this stage can help protect more sensitive downstream equipment or membrane filtration.

Stage 3 – Membrane filtration

Where required, a membrane cartridge provides a defined level of final filtration for applications with more demanding particle-retention requirements.

The membrane rating, efficiency and compatibility need to be selected according to the process and required outcome.

Why use multiple filtration stages?

Using multiple stages can help prevent a fine downstream filter from becoming overloaded with contaminants that could have been removed earlier.

For example, placing a suitable coarse or depth-style cartridge upstream of a finer pleated or membrane cartridge may:

  • Reduce contaminant loading on the final filter.
  • Extend downstream cartridge service life.
  • Help maintain more stable operating conditions.
  • Reduce the frequency of fine-filter changeouts.
  • Improve the overall economics of the filtration system.

However, adding more filtration stages is not automatically beneficial.

Each additional stage introduces pressure drop, consumable costs, maintenance requirements and potential points of failure.

The filtration arrangement should therefore be designed around the actual contaminant loading and the level of protection required at each stage.

Making the right filtration choice

Depth and pleated filters both have an important role in industrial liquid filtration. The challenge is understanding which construction is best suited to the application.

Depth filtration is often worth considering where contaminant loading is higher, particle sizes vary and internal media volume can be used to retain solids throughout the filter structure.

Pleated filtration can be advantageous where increased effective surface area, defined particle retention, high flow rates and compact cartridge design are important.

However, the distinction is not always as simple as choosing one technology over the other. Pleated-depth cartridges demonstrate how manufacturers can combine different construction principles to achieve specific filtration characteristics.

Before selecting a replacement cartridge or specifying a new filtration system, it is worth considering the following:

  • Contaminant characteristics: What particles are present, and what are their sizes, shapes and concentrations?
  • Filtration efficiency: What level of particle removal is actually required?
  • Flow rate: What is the required operating flow, and how does it affect the filter's pressure drop?
  • Fluid properties: What are the liquid's viscosity, temperature and chemical characteristics?
  • Differential pressure: What is the maximum allowable pressure drop, and at what point should the cartridge be changed?
  • Service life: How frequently are filters currently being replaced, and could the filtration arrangement be improved?
  • Operating costs: What is the overall cost of filtration when consumables, labour, energy and downtime are considered?

At PoreFiltration, we believe effective filtration starts with understanding the process.

Rather than simply matching an existing cartridge by micron rating or dimensions, assessing the application as a whole can help identify opportunities to improve filtration performance, extend service life and reduce operating costs.

Need help choosing between depth and pleated filtration?

Our team can help assess your application, review your existing filtration arrangement and recommend a suitable solution based on your process requirements.

Whether you are looking to improve filter life, reduce differential pressure or protect downstream equipment, choosing the right filtration construction can make a measurable difference to your operation.

PoreFiltration – Making your filtration systems work harder